digital projection 18k wuxga laser projector  

Laserový projektor s WUXGA (1920x1200px) rozlišením.

Výměnné objektivy.

Světelný výkon 18000 lm.

 

M-Vision Laser 18K WUXGA

18,000 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) | Part Number: 118-053

18,000 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) | Part Number: 118-053

Colour System: DMD Specification:
Blue Laser Phosphor + 4-segment colour wheel

Display Type:
1 x 0.96" DarkChip™ DMD™
1920 x 1200 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast. 
Aspect Ratio:
16x10 
Fill Factor
87%

Key Features

Video & Graphics Processing
    • HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & TopBottom 3D Formats.
    • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
    • Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
    • Synchronisation of active glasses.
    • 3G-SDI with loop-through.
    • 24p and 1080p native display.
Geometry Correction
    • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
    • Blanking control for custom input window sizing.
    • Scaling for fixed aspect ratio screens.
Edge Blending
    • Correction for non-active pixels at the edge of the display.
Picture in Picture
    • Two sources can be displayed either one within the other (PIP) , or side by side, with the original aspect ratios maintained.
HDBaseT® Interface
    • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
    • Allows the projector to be placed up to 100m from source with low cost cabling.
Colour Processing
    • Powerful seven-point colour correction for accurate colour matching.
Projector Controller Software
    • Intuitive user interface for network control.
    • Simultaneous control of user-defined groups of projectors.
    • At-a-glance monitoring of projector status.
Projector Automation
    • Real-time clock provides daily on/off automation.
Installation
    • Integrated stacking mount pins.
    • Eye bolts included for easy rigging.
Source Compatibility:
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or DisplayPort.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

DisplayPort 1.1a
HDMI 1.4a
3G-SDI in
3G-SDI out
HDBaseT (see LAN)
DisplayPort
HDMI
BNC
BNC
LAN RJ45
2
2
1
1
1
 Communication & Control

Type

Connector

Qty

3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger

NOTE: The HDBaseT and LAN ports are not shared.
BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
1
1
1
1
1
2
3D Formats Supported HDTV Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half) 
Top and Bottom
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080i (50Hz, 60Hz), 720p (50Hz, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 165 MHz on analog RGB
165 Megapixels per second on HDMI
Remote Control Automation Control
Addressable IR Remote Control, wireless and wired
On-Board keypad
Crestron RoomView® Connected
PJLink Class 1
LAN
RS232
AMX (Device Discovery)
Served web page
Colour Temperature Operation
3200K to 9300K
illumination Type Typical illumination Life
Laser Light Source 20,000 hours
Lenses

Lens

Part No.

Optimised Focus Range*

Lens Shift

0.84 - 1.03 : 1 zoom 114-313 1.5m - 10m Vert: 0.37 (U) 0.37 (D) frame, Hor: 0.12 (L) 0.12 (R) frame
1.20 - 1.56 : 1 zoom 117-573 1m - 8m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.50 - 2.00 : 1 zoom 118-578 2m - 12m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.00 - 4.00 : 1 zoom 118-588 2.5m - 42m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
4.00 - 7.00 : 1 zoom 117-463 4m - 42m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details.

Lens Mount

Motorised and programmable shift, zoom and focus.

Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Table Top or Inverted: Yes 
Pointing Up:        Yes 
Pointing Down:   Yes 
Roll (Portrait):      Yes
Power Requirements Power Consumption
100 - 240VAC 50/60Hz single phase * Note that in 120V operation, the projector will be at 65% brightness Typical 2000W @ 240VAC in Normal mode
Typical 1200W @ 240VAC in ECO mode
Typical 1200W @ 110VAC in Normal mode
Typical 1000W @ 110VAC in ECO modeW
Thermal Dissipation Fan Noise
Typical 4146 BTU/Hour @ 240VAC in Normal mode
Typical 3276 BTU/Hour @ 240VAC in ECO mode
Typical 4334 BTU/Hour @ 110VAC in Normal mode
Typical 3412 BTU/Hour @ 110VAC in ECO mode BTU/Hour
Normal mode: 45 dBA max, 42 dBA typical
Eco mode: 42 dBA max, 39dBA typical
Operating/Storage Temperature Operating Humidity 
Operating: 0 to 40C (32 to 104F)
Storage: -20 to 60C (-4 to 140F)
10% to 90% relative, non-condensing
Weight (Chassis Only) Dimensions
49 kg 
108 lb 
H: 24.8 cm W: 53.0 cm L: 69.5 cm
H: 9.8 in W: 20.9 in L: 27.4 in
Safety & EMC Regulations  
UL/cUL, CB, CCC, FCC Class A , CE, RoHS 2
IEC EN 60825-1:2014 Class 1 Laser Product
IEC 60825-1:2007 Class 3R Laser Product 
IEC EN 62471-5:2015 Risk Group 3
 
Accessories
Accessory Part No.
Infrared Remote (replacement) 117-780

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

User Guides

User Guides (Korean)

Laser Risk Group Document

Important Information

Control Protocol

Projector Controller Software 4.4    User Guide

Kletch CZ s.r.o.
Výstaviště 405/1
Brno 647 00

Tel: +420 607 147 717
Email: Tato e-mailová adresa je chráněna před spamboty. Pro její zobrazení musíte mít povolen Javascript.
www.jblvtx.cz www.ledp3.cz www.podiumbrno.cz