shure qlxd4 dpa4088   Bezdrátová sada: bodypack + DPA 4088. Přijímač QLXD4.

 

 

d:fine™ Headset Microphones 4088 DIRECTIONAL HEADSET MICROPHONE

Directional pattern
Cardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in)
100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)
Sensitivity, nominal, ±3 dB at 1 kHz
6 mV/Pa; 44 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 68 dB (A)
Total harmonic distortion (THD)
< 1% up to 123 dB SPL peak; < 1% up to 120 dB SPL RMS sine
Dynamic range
Typ. 97 dB
Max. SPL, peak before clipping
144 dB
Output impedance
30 - 40 Ω
Cable drive capability
Up to 300 m (984 ft)
Power supply (for full performance)
For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Connector
MicroDot
Color
Skin color
Weight
14 g (0.5 oz) incl. Cable and MicroDot connector
Microphone diameter
5.5 mm (0.25 in)
Microphone length
11 mm (0.5 in)
Cable length
1.2 m (3.9 ft)
Cable diameter
1.6 mm (0.06 in)
Polarity
Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range
-40°C to 45°C (-40°F to 113°F)


 

Features

  • Transparent 24-bit digital audio captures every performance detail
  • Over 120 dB of dynamic range eliminates transmitter gain adjustments
  • Easy pairing of transmitters and receivers over IR scan and sync
  • Automatic channel scan quickly and easily finds a clean frequency
  • Networked channel scan configures open frequencies for connected receivers
  • Remote monitoring and control from iOS devices via ShurePlus™ Channels Mobile App
  • AES-256 encryption comes standard for secure wireless transmission
  • Elegant and easy-to-use interface with high-contrast LCD menu
  • AMX/Crestron control system ready
  • Professional-grade, all metal construction

Kletch CZ s.r.o.
Výstaviště 405/1
Brno 647 00

Tel: +420 607 147 717
Email: Tato e-mailová adresa je chráněna před spamboty. Pro její zobrazení musíte mít povolen Javascript.
www.jblvtx.cz www.ledp3.cz www.podiumbrno.cz